Save Big Money – Preventative Maintenance Keeps Your Vehicle Operating At It’s Most Efficient Level

With today’s fuel costs it is imperative that you keep your engine properly tuned to allow it to achieve it’s maximum mileage potential.

It goes without saying that repairing a car that is obviously out of tune can improve its gas mileage. Studies have shown a mileage increase that can average 4 percent is possible.

Repairing a severe maintenance problem, say a defective oxygen sensor, could improve your mileage by considerably more.

Inspect & replace dirty air filters and inspect damaged exhaust components.

Understand that just like your body, your vehicle’s engine must be able to breath air in and exhale properly to perform.

If you have an exhaust pipe, or muffler that has been severely dented, or a clogged catalectic converter, your engine can not exhale properly so performance and efficiency suffers. With gas at around $3.00 per gallon that costs you big time.

Replacing a dirty air filter can improve your car’s gas mileage by as much as 10 percent. Remember your car’s air filter catches that dirt so it doesn’t end up in your engine. So not only do you save money on gas, but you are protecting your investment.

Keep Your Tires Properly Inflated.

Maintaining proper tire pressure can boost fuel economy by as much as 6 percent. And, if you find a service facility that uses nitrogen you’ll have the added benefit of dispersing heat more quickly than ambient air. By reducing the heat in the tire and reducing rolling resistance, you get better fuel economy.

Also, with that quicker heat dispersion, you get a cooler running tire which helps extend tread life and reduce tire failure. Nitrogen also prevents oxidation which can lead to tread separation and belt failure.

Always use the Recommended Grade of Motor Oil.

You can reduce your gas mileage by 1-2 percent by not using the manufacturer’s recommended grade of motor oil. For example, using 10W-30 motor oil in an engine designed to use 5W-30 can lower your gas mileage. Or, using 5W-30 in an engine designed for 5W-20.

In addition, changing that dirty motor oil will allow your vehicle’s engine to run cooler and probably longer, so again you’re protecting your investment. If you use oil that says “Energy Conserving” on the API performance symbol that means it contains friction-reducing additives and that just adds to the benefits.

Advanced Polymer Repair Products – Save Time, Money, and Aggravation

In today’s economy, industry, state, government agencies, and maintenance engineers everywhere are being forced to do more with less. With operating budgets well below average, facilities and organizations of all multitudes are no longer able to replace pieces of capital equipment, or undertake major structural rehabilitation projects. However, with technology advancing at an exponential rate there are alternate routes around having to replace valuable pieces of machinery, equipment, and structures. Advanced composite, coating, and rebuilding systems are beginning to have a strong presence in facility management and maintenance schedules worldwide. These advanced polymer repair products are cost effective, commercially proven, and often save organizations tens of thousands of dollars by reducing life cycle cost, increasing efficiency, decreasing down time, and providing longterm solutions.

Historically these polymer repair products are used in addressing concrete rehabilitation, water intrusion, erosion, corrosion, leaking pipes and roofs, impact, shock, chemical attack, online hydrostatic pressure leaks, and fluid flow related issues.

Examples:
• Leaking Elevator Pits
• Water Intrusion of basements and sub-basements
• Wheel chair transitions
• Pump coatings
• Leaking Pipes
• Shaft Repairs in place or on a lathe
• Broadcast floors
• Sealing of a wide variety of roofs from EPDM to Metal
• Industrial Floor Coatings for heavy wear and tear zones from kitchens to Air Force Hangers
• Containment Areas suffering from chemical attack
• Retro-fitting of Cooling towers to extend the life of the unit
• Tube Shell Heat Exchangers and corresponding End Bells
• Tanks
• Non-skid surfacing

These systems are used by organizations of a variety of sizes. From the YMCA, School Districts, Cities, Counties, Commercial Buildings and Structures, Refineries, Hospitals, Nuclear Power Plants all the way up to the United States Navy. These systems will be more expensive than the conventional over the counter repair method. However, when repairs are being made year after year, these systems pay off greatly in the back end. Often these companies will have no heart ache about coming in and educating you and your team about their products, and often this can be valuable to your team. Just remember that there are dozens of manufacturers of systems such as these. It pays off to do your homework before moving forward with a company.

Why Maintenance Will Prolong the Life of Your Audio Visual Equipment

Audio visual equipment plays an important part in selling or communication departments of various businesses. Thus, the reliability of the equipment is extremely important and should not be taken for granted.

An audio visual equipment supplier will cover the first steps implementing design for audio visual equipment layout and will make recommendations and suggestions that can help reach an optimal solution. The company may run their own installation teams. Having their own engineers, it becomes easier to assume and trace responsibility during all steps of this process. People will measure the company by the quality of installation service they will offer.

After the equipment is installed, you should benefit from a one to five year warranty. Maintenance visits will have an objective to check if the equipment is working properly, for example if filters or projectors are clean. As audio visual equipment can function improperly due to dust accumulated inside, this can invalidate the warranty. Maintenance contracts and insurance on equipment will vary depending on variables related to the specific situation. Response time can vary from two to 24 hours depending on the type of service you are looking for. Preventive maintenance visits may be scheduled once or twice a year, their focus being on checking on the state of equipment.

Most companies offer a call center providing technical support and customer support. Online, telephone, in house repair centers are some of the ways the companies make sure your equipment is well maintained.

The audio visual products usually have a one to three years warranty offered by the manufacturers. Although the equipment can last for three years up to five years or longer if proper care is taken, you should start thinking of new equipment during the fourth year, as technology moves on. Maintenance costs also tend to be greater after four years too.

Maintenance contractors can provide training to use the equipment. There is also refresher training on how to profit the most out of the equipment you purchased. There may be options you did not consider when you first bought the equipment, but in time you will have to access other functions and you need extra training on some features.

Maintenance is important because it can guarantee that the audio visual products you have purchased will work in any situation and will not cause a disruption that might cause you to lose money.

Maintenance Contracts are available with a range of options to offer you flexibility in choosing the type of service you need and can afford.

Maintenance helps you protect the investment you have made in audio visual equipment. A regular check on your equipment can help to see if you use it in accordance with the manufacturer’s recommendations, at an optimum performance level and sustain the longevity of the equipment.

Once you install a video conferencing system, for example, the audio visual equipment will be optimally maintained if you benefit from a maintenance contract. Customers have different skill-sets and needs, so the maintenance contracts can be customized to suit these needs.

You can rely on the maintenance team to help you troubleshoot any issues. You just have to understand that maintaining your audio visual equipment will guarantee a greater return on the investment for such products.